View Single Post
Old 03-18-2011, 08:21 PM   #8
jimmyloose
Registered User
 
Join Date: Jan 2008
Location: Irvine, CA
Posts: 34
My Ride: Der Kombi.
Quote:
Originally Posted by steven747 View Post
Unfortunately you have a 330, and the input flange is different. I'm not really keen on setting preload after swapping the flanges without a better torque wrench.

Good news is, I found my old E12 external torx socket! I won't need any other tools to install except a 9/16ths bolt and some nuts... Which I could swear I have left over from the time I swapped my diff on the 318ti.

Still up for grabs.

There aren't really any parts that neeed to be replaced, but it's suggested you replace the rubber o-rings around your drain plugs, and I'm going to say fluid as well. The o-rings are $0.36 a pair from BMW, and gear oil really isn't expensive.

STILL LOOKING FOR SOMEONE INTERESTED IN THE SWAP.
jimmyloose is offline   Reply With Quote