View Single Post
Old 04-24-2011, 10:45 PM   #13
2003330i
Registered User
 
Join Date: Feb 2004
Location: Haverstraw, NY
Posts: 1,317
My Ride: SC'330izhp,09 335i,
Quote:
Originally Posted by VMRWheels View Post
Generally for your car we recommend going with square fitment, but some customers of ours like to go staggered. An 8.5" wide front with offsets ranging from +35mm to +40mm will work without any issues, and if you wanted to go staggered I would go with a 9.5" wide rear with an offset of +45mm.

For tires, we recommend going with a 235/35/19 for the front and 255/30/19 rear if you went staggered. Generally coupes have a bit more room than sedans, so they can run a 265/30/19.
I just bought a set of 19 inch vmr 715 staggered. Tires are Kuhma Ecsta SPT235/35 and rears are 255/30. offset is 38 and 45 in the rear. my suspension is kw2's. I installed the wheel and tires and my rear left tire is rubbing.
Now my question should I just dial up the suspension and roll my fenders or will I be okay just rolling the suspension. Keep in mind that my drop with the suspension was an inch at the most.
__________________
2003330i is offline   Reply With Quote