| The black plastic molding is replaceable for the rear window. I ordered a pair from Tischer BMW and changed mine out last year.
Part Number: 51368209421 (left)
Part Number: 51368209422 (right)
I paid $63.59 per side
To remove the original molding, use a hair dryer to loosen up the adhesive then use a little bit of muscle to just pull it out. Then sparingly use silicon to re-adhere the new molding to the window. Don't lower the window and allow 24 hours for the silicon to cure.
Last edited by duhprez; 05-11-2011 at 12:17 PM.