View Single Post
Old 05-08-2011, 02:06 PM   #1
introspekt408
Registered User
 
Join Date: Dec 2007
Location: san jose ca
Posts: 45
My Ride: ---328i
Transmission fluid cooler lines(remove/replace)

I've searched and searched and there really is not a whole lot on this! I've started to take pics to hopefully put a good DIY out there however, I'm a litttle stuck and need help with putting the new one in. I got the bad one out, but now trying to squeeze the new one in seems so difficult and seems it could have been designed to be much easier! Someone noted that removing the engine mount bracket really helps, so if that is the case what would I need to remove to get to that bracket because its pretty deep down in there. Any help would be great before I have to tow it and have a shop do it!!!!

here are my questions:
1.Does anyone have any tips and/or tricks on how to snake this part metal/rubber hose in there?

2. If removing the engine mount bracket/mount helps, what would I need to remove to get to that bracket because its pretty deep down in there.

introspekt408 is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.