View Single Post
Old 06-13-2011, 04:46 AM   #48
kensou
Registered User
 
Join Date: Sep 2008
Location: Marseille
Posts: 178
My Ride: ///M3 E46 cab
Send a message via MSN to kensou Send a message via Yahoo to kensou
Quote:
Originally Posted by Blue Mesa View Post
Yes. Pop off the emblem. There is then a screw under it holding the trim to the car. Then get ready to sand down the back of the camera/led a lot or it won't fit in the enclosure. You also don't have to separate the painted trim from the plastic (black) part underneath. Just pry off the cover to the light and take out the light parts. Once I sanded down the back of the camera/led I also had to use two small screws to hold it in place. A bit of a pain but nice once u get there.
Hi,

Thanks to your instructions, I succeeded to remove the trunk trim and install finally the reverse camera ! It's working really good. I'm happy.

I also installed the Alpine KCA-420v, in order to use multiple video sources.
for my case, there is:
source#1 : Alpine DHA-S690 6 DVD changer (to watch dvd/divx)
source#2 : i-phone/i-pod source, apple cable is in the glovebox.
source#3 : reverse camera



Thanks a lot for your reading.
Kiss.

Last edited by kensou; 06-13-2011 at 05:03 AM.
kensou is offline   Reply With Quote