View Single Post
Old 06-26-2011, 01:33 AM   #84
Darkoz
Registered User
 
Join Date: Jul 2008
Location: South Australia
Posts: 3,307
My Ride: E46 325Ci
Quote:
Originally Posted by dt_328xi View Post
hey guys,

I know this is the wrong forum but there is a lot more info on Dynavin here. I installed my E90 dynavin unit today, but it does not turn on. I checked all the directions 2x and everything seems to be plugged in correctly.

I start the car, wait 30 seconds then pressed the left knob and the unit does not turn on. The climate control works and so do the seat warmer buttons but the dynavin unit will not power on.

I noticed that when I plugged the yellow wire into the fuse box the car was off, but the dynavin unit lit up by the disk drive for a second and the drive made a sound like it spinning then everything turns off.

After that it does not lite up or turn on.

I need help please! If anyone has any suggestions on how to diagnose the problem I would really appreciate it!
When you first turn the car on there is no need to press the left hand knob on the Dynavin.
Did you have the battery disconnected while you were insalling the unit?
Check the fuses in the glovebox and make sure none are blown.
__________________
Darkoz is offline   Reply With Quote