View Single Post
Old 07-16-2011, 01:37 PM   #7
Registered User
Join Date: Aug 2010
Location: Reston, VA
Posts: 2,674
My Ride: 77' 924 87' E30
Originally Posted by Optio View Post
All my connectors under the hood are spread out just as you have described. I believe that this is normal and may or may not have anything to do with the electrical connection. I just tighten the VANOS contacts up slightly and will test drive it and to observe the change if any. I noticed that if you are not careful, you can easily push the contact down into the plastic assembly.
Are you having hesitation issues? Also keep in mind that this is what worked for me; nothing else was done in between. If it doesn't work for someone else then it means something else is off. But if everything checks out just fine then this is something to look at.

Keep us updated
Bilstein HD's | E30 M3 FCAB's | H&R OE Sports | F+R strut bars | Self tuned 027 93 octane chip | KoseiK1's on R888's | + crazy OCD maintenance
new//M3fan is offline   Reply With Quote