View Single Post
Old 09-17-2011, 04:48 PM   #49
HarjG
Registered User
 
Join Date: Sep 2011
Location: London, UK
Posts: 16
My Ride: E46 325i Sport
Hi All!

I am new to this so please bear with me.

I have read thoroughly through this forum and others on the internet and cannot get to the bottom of the issue I am facing.

Current Setup

Widescreen Satnav with TV/bluetooth/Mk4 DVD/Alpine MP3 CD Changer with Intravee II.

Issue:

Installed Rear View Camera (Link below)

http://www.ebay.co.uk/itm/BMW-E46-3-...item3368401f88

Wired up relay as mentioned in other forums on this site (Pin 17 blue, 2 grounds and 12v + from the reverse light.

Now, when I plug in the Video cable into pin 13,14 on the tv module, the picture flickers and looks as if its grey and not colour.

If I plug the video cable into AV pins on the TV Module and switch the Nav Monitor to AV, the picture is clear.

On a lot of forums it states the reverse camera must be NTSC to work.
I have checked this and it is. When I select AV mode, the camera only works if I set it to NTSC else it flickers if set to PAL. (This proves the camera is NTSC to me, else I am wrong)

So my question is, why is the picture flickering when in pin 13,14 (White connector and pin 17 on Blue connector)?
HarjG is offline   Reply With Quote