View Single Post
Old 09-28-2011, 09:00 AM   #5
tasi333
Registered User
 
Join Date: May 2010
Location: Fremont, CA
Posts: 134
My Ride: 330Ci Convertible
Quote:
Originally Posted by DHNT2005 View Post
I noticed that you added a 15mm spacer in the front and 12mm rear, so final offset is 19x8.5 +20 front and 19x9.5 +33 rear? any fender work? rubbing? Car looks great BTW! Love topaz I would suggest some side skirts and an MTech2 rear bumper next.
Definitely the rear bumper and skirts next.

I rolled the rear as much as I could, but it was a real pain, I would recommend cutting to allow for the best offset. I would like to go even more aggressive on he back but can't until I cut.

I had 255s on the back and dropped down to 245s, now there is no rubbing at all. Same with the front, went from 235s to 225s and now have no issues. I have a high rear camber, as negative as possible without camber plates. And some negative on the front.
__________________



2002 330 Cic Topaz Blue
VMR 701; Front 19x8.5et35 225/35; Rear 19x9.5et45 245/30 | Spacers: 15mm front; 12mm rear | Megan Racing Coil Overs | Short shifter | eBay Strut Bar | Angel Eyes | LED Tails | Dynavin (Droid) | Vanos | DISA

*My Car Thread (Pics & Mod details):
http://forum.e46fanatics.com/showthread.php?t=873246
tasi333 is offline   Reply With Quote