Thanks good point about the splash guard. I guess I'll have to put the fan in to test it though.
Originally Posted by paraklas
Looks seated to me, compared with some of the pics I have on page 1 they look the same. The splash cover should not be installed before checking/testing for leaks, if coolant is leaking it will be fairly obvious
All seems to have gone fine. I was worried about the ET because it seemed loose. After the fan/shroud is re-installed it is all tight again. I did have a leak on the hoses at the top of the ET. You really have to push the hose on well before pushing down on the clip. It seamed like it was on properly until things started to heat up!
Last edited by ELCID86; 10-22-2011 at 12:35 PM.