View Single Post
Old 10-26-2011, 02:59 AM   #11
Registered User
Join Date: Mar 2011
Location: Solihull
Posts: 103
My Ride: Cars
A friend of mine has been over today looking at the canbus side of things & it's quite involved & going to take some work to do so as temp quick fix I'm going to install a set of E36 clocks I have while Rob works on the can bus.

This morning Craig fitted the LS7 clutch & T56 gearbox together & then poked the engine into the hole.....

& the he made some engine & gearbox mounts

& it's in

That's a very long difficult day made to sound very easy.... it's not trust me!

I've dropped the prop off to be shortened & have the correct end fitted for the T56 box & in the morning I'm off to Jetex to collect the bends & pipe/parts so Craig can start making the headers

It's been a busy few days for Craig @ DynoTorque he,s made the exhaust headers & connected them to rear section along with sorting power steering lines.




Waiting for the t**t that's borrowed efi live to bring it back so I can unlock the ECU then it will start

bikealarmblair is offline   Reply With Quote