View Single Post
Old 11-14-2011, 03:39 PM   #273
PAPER
Registered User
 
Join Date: Nov 2011
Location: LOS ANGELES
Posts: 200
My Ride: 745LI
this is for those of you that have been asking me for the codes .
Some of your cars have these features to activate & some don't .


CAS module

Comfort close windows using remote (push-hold lock button)

KOMFORTSCHLIESSUNG_FB (comfort closing with remote (power windows, sunroof or convertible top))
aktiv (set to this)
nicht_aktiv (original value)


HKL module

Comfort close trunk (push-hold lock button)

KOMFORT_SCHLIESSEN_HKL (comfort close trunk (push-hold trunk or lock button))
aktiv (set to this)
nicht_aktiv (original value)


LM module - IGNITION MUST BE ON TO CODE

Turn daytime running lights on/off

DRL_V_GEDIMMT (daytime running lights / NCSDummy: dimmed front daytime running lights)
nicht_aktiv (lights off)
wert_01 (unknown / value 01)
wert_02 (lights on / value 02)

Change light-touch blinker behavior

MIND_ANZ_ZYKL_TIPP_BLK (one-touch turn signal function)
wert_01 (one blink / value 01)
wert_02 (three blinks / value 02)

Remove check-control for backup lights

FEHLERMELDUNG_CC_RFS_L (check control (CC) left backup light failure)
aktiv (original value)
nicht_aktiv (set to this)

FEHLERMELDUNG_CC_RFS_R (check control (CC) right backup light failure)
aktiv (original value)
nicht_aktiv (set to this)

Set to allow front fog lights with high beams on

FL_UND_NSW_NICHT_GLEICHZ (front fog lights not simultaneously with high beams)
aktiv (original value)
nicht_aktiv (set to this)


MMI module

Remove legal disclaimer accept

FAHRZEUGTYP_MMI
ece_ll / europe (left-hand drive) (set to this)
ece_rl / europe (right-hand drive)
us_ll (original value)

LAENDERVARIANTE_BNDB_MMI
aegypten / egypt
australien / australia
deutschland / germany
ece / ece (europe) (set to this)
gb / great britain
golf / persian gulf states
japan / japan
kanada / canada
korea / korea
suedafrika / south africa
taiwan / taiwan
us / us (united states of america) (original value)


SHD module

Close sunroof with wiper operation

REGENSCHLIESSEN (close sunroof with automatic (RL) wiper operation)
aktiv (set to this)
nicht_aktiv (original value)

REGENSCHLIESSENTILT (close tilted sunroof with automatic (RL) wiper operation)
aktiv (set to this)
nicht_aktiv (original value)


Control unit: Cappl

MDrive
nicht_aktiv -> active
HUD_M
nicht_aktiv -> active

Control unit: HUD

M_SPORT_HUD
nicht_aktiv -> active
nicht_aktiv -> aktiv_handschalter

[Turn indicator in the HUD]*

Control unit: HUD

BLINKER_AUSSTATTUNG
nicht_aktiv -> active

[Reel speed or tachometer option in the onboard computer]*

Digital speedometer in the vehicle computer.

Control unit: COMBINATION

BC_DIGITAL_V
nicht_aktiv -> active
BC_DIGITAL_V_KORREKTUR
active / nicht_aktiv

[Permanent instrumentation lighting]*

The speedometer light despite the lights always on first ignition

Control unit: COMBINATION

M_TAG_SKALENBELEUCHTUNG
nicht_aktiv -> active

[Blank line in the paste-board computer]*

Control unit: COMBINATION

BC_LEERZEILE
nicht_aktiv -> active

[Speed settings for climate control display]*

The current fan speed is displayed even in the automatic operation of the air conditioning.

Control unit: IHKA

GEBL_ANZEIGE_AUTO
nicht_aktiv -> active

[No automatic. Compressor] with climate control*

When you press the automatic button will no longer switch automatically sets the air conditioning.

Control unit: IHKA

ABWAHL_AC
nicht_aktiv -> active

[Spiegelanklappen on the remote key]*

Connect with the comfort = longer pressing the Connect button on the remote control.

Control unit: KGM or TMBT and TMFT

BEIKLAPPEN_B_KOMFORTSCHL
nicht_aktiv -> active

[Roof rain Close]*

with rain sensor is activated.

Control unit: SHD or HSDH

RAIN CLOSE
nicht_aktiv -> active

If with respect to the coding, an error message comes the pinch:

- Ignition on
- Ensure that the sunroof is closed
- Press the key to lifting / tilting the sunroof and hold (approx. 1 minute) until all settings have been hit once and the sunroof is closed.

[Comfort tailgate open and close]*

Komfort-Öffnen/Schließen = longer pressing the open or close button on the remote.

Control unit: HKL

KOMFORT_OEFFNEN_HKL
nicht_aktiv -> active
KOMFORT_SCHLIESSEN_HKL
nicht_aktiv -> active

Tailgate by pressing only once on the key itself include:

FUNKTION_FBD_SCHLIESSEN_2
nicht_aktiv -> active*

Tailgate to close the switch in the foot:

FUNKTION_TOEHKI
nicht_aktiv -> active

[TV / Video while driving activation]*

Control unit: Cappl

VIDEO_DENY_C0B
deny_slow_key -> deny_never

[Entry aid steering wheel height adjustment de-/activate]*

Control unit: tractor

EINSTIEGSHILFE_HOEHE
active -> nicht_aktiv

[Steering wheel button function "next entertainment source" Add]*

Control unit: Cappl (from the first software release CCC_APP.C0A)

NEXT_SOURCE
nicht_aktiv -> active

AM Tuner skip:

AMBANDS
active -> nicht_aktiv

[IDrive options for acoustic locking and unlocking Add (with DWA)]*

Control unit: Cappl or MASK

ACOUSTIC
nicht_aktiv -> active
C941C_QUITT_AKUST_KLAPPE
fkt_gesperrt -> fkt_frei
K9416_QUITT_AKUST_ENTSCH
fkt_gesperrt -> fkt_frei
C9413_QUITT_AKUST_SCHAERF
fkt_gesperrt -> fkt_frei

[Change the alarm sound of the beeping of the DWA to howl]*

Control unit: DWAS

ALARM TYPE
U.S.

[Advanced maneuvering in the iDrive menu]*

for example, a rear-view camera is connected via LVDS.

Control unit: Cappl

RVC
nicht_aktiv -> active
RVC_CONNECTED_TO_VM
nicht_aktiv / active
RVC_DISPLAY_OPTIONS
main_or_fullscreen / only_fullscreen only_mainwindow /*

[Seat climate menu in the iDrive]*

Control unit: Cappl

VA_AIRVENT_SHORTCUT
nicht_aktiv -> active
VA_SEATCLIMA_SHORTCUT
nicht_aktiv -> active
VA_SEATHEAT_SLIDER
nicht_aktiv -> active
VA_SEATVENTILATION
nicht_aktiv -> active
SITZHEIZUNG_APP_9
nicht_aktiv -> active

[SMS display in the iDrive]*

Control unit: Cappl

SMS
nicht_aktiv -> active

[Notepad complement in the iDrive menu, phone]*

Control unit: Cappl

NOTEPAD
nicht_aktiv -> active

[Comfort Open (2 times to open the remote control) to the driver's window semi]*

Control unit: Cappl

K931D_SCHEIBENABSENKUNG
par_gesperrt -> par_frei

[Light sensor sensitivity settings menu in the iDrive]*

Control unit: Cappl

RAIN_LIGHT_SENSOR
nicht_aktiv -> active
C750A_SCHWELLWERT_EMPFIN
par_gesperrt -> par_frei
C750A_SCHWELLWERT_NORMAL
par_gesperrt -> par_frei
C750A_SCHWELLWERT_SEHR_E
par_gesperrt -> par_frei

and vehicle application by:

FLCN + = normal threshold
+ FLCS = threshold very sensitive

[Light sensor sensitivity setting]*

Control unit: RLS

FLC_SCHWELLWERT_SATZ
wert_01]
wert_04] = sensitive

wert_02 = normal
wert_03 = very sensitive

[Daytime running lights non LCI]*

VFL headlights with LM1:

Control unit: LMA

DRL_V_GEDIMMT
nicht_aktiv -> wert_01 = Indicator -> wert_02 = beam
DRL_WERT_DIMMUNG
wert_01 = 26% -> wert_02 = 40%

Daytime running lights on the main (only LM2):*

VERHALTEN_DRL_TFL_33
drl_tfl_off -> drl_h -> drl_s -> drl_l -> tfl_s

U.S. daytime running across the beam (only halogen beam and LM2):*

VERHALTEN_DRL_TFL_33
drl_h
PWM_FL_FKT_DRL_33
wert_01 to wert_03 = Dimmungswert

[U.S. indicators with side turn indicators on parking lights or headlights]*

Control unit: LMA

DRL_TFL_BLK_V_GED
nicht_aktiv -> active
PWM_SIDEMARKER_BLK_V
wert_01 = off
wert_02 = light
wert_03 = dark

[Side marker lights with daytime running lights activated (only LCI)]*

Control unit: LMA

SL_V_MIT_TFL
active

[As cornering fog lamps with LM2]*

! Works! Jakober not loud! Request for feedback

Control unit: LMA

PWM_FL_NSW_FKT_ABBLIEGELI
wert_01 -> wert_02

[Cold and hot control of the lamps]*

Control unit: LMA

KALTUEBERWACHUNG_
KALTUEBERW_
WARMUEBERWACHUNG_
WARMUEBERW_
FEHLERMELDUNG_CC_

RFS_R, RFS_L = Reverse Light
FL_R, FL_L = beam
AL_R, AL_L = cornering
SL_V_R, SL_V_L = parking light
NSW_R, NSW_L = fog
BLK_V_R, BLK_V_L = flashing front
BLK_H_R, BLK_H_L = flashing back
BL_M_1 = 3 Brake light
KZL_R, KZL_L = plate light
NSL_R, NSL_L = rear fog lamp
TFL_R, TFL_L = Daylight
SML = Side marker lamps
BL_R, BL_R = brake light
RL_BL_1_R, RL_BL_1_L = tail light brake light 1
RL_BL_2_R, RL_BL_2_L = tail light brake light 2

[Welcome Light]*

Only works with light module 2 (LM2 all LCI or all VFL 09/2006 have with xenon and adaptive headlights) and the light switch in automatic position + position 1

Control unit: LMA

WELCOME_LIGHT_ACTIVE
nicht_aktiv -> active
WL_AL = low beam
nicht_aktiv / hart_einschalten
WL_BL = brake light
nicht_aktiv soft_einschalten / / hart_einschalten
WL_BLK_H = Left Rear
nicht_aktiv soft_einschalten / / hart_einschalten
WL_BLK_V = front indicator
nicht_aktiv soft_einschalten / / hart_einschalten
WL_FL = beam
nicht_aktiv soft_einschalten / / hart_einschalten
WL_KZL = plate light
nicht_aktiv soft_einschalten / / hart_einschalten
WL_NSL = rear fog lamp
nicht_aktiv soft_einschalten / / hart_einschalten
WL_NSW = fog
nicht_aktiv soft_einschalten / / hart_einschalten
WL_POL = position or the front parking light
nicht_aktiv soft_einschalten / / hart_einschalten
WL_SL_1 = closing or parking light rear 1
nicht_aktiv soft_einschalten / / hart_einschalten
WL_SL_2 = closing or parking lights, rear 2
nicht_aktiv soft_einschalten / / hart_einschalten
WL_SM = Eyebrow
nicht_aktiv soft_einschalten / / hart_einschalten

[Coming Home Light only VFL]*

After switching off the engine and operate the ignition, the flashing briefly.

Control unit: LMA

HEIMLEUCHTEN_

[Eyebrow / off]*

Control unit: LMA

SIDEMARKER_US
active -> nicht_aktiv

[Flash light with bi-xenon]*

Control unit: LMA

BI_XENON_BEI_LH
nicht_aktiv -> active

[Interior of brake lights during normal braking (only VFL Taillights)]*

Control unit: LMA

RL_BL_1_BREMSL_FKT
nicht_aktiv -> active

[Beam with the Xenon headlights and not also on the high beam-H7 (only VFL)]*

Light switch to automatic:

Control unit: LMA

FL_AUS_BEI_BIX_IN_S_FLC
active

Light switches in all positions:

Control unit: LMA

PWM_ANST_FL_BIXENON
wert_03

[Beam and fog lamps are not simultaneously]*

Control unit: LMA

FL_UND_NSW_NICHT_GLEICHZ
nicht_aktiv -> active

[Flashing adaptive brake lights (Break Force Display)]*

In an emergency stop flashing the lights.

Control unit: LMA

BFD_1_RL_BL_ERSCH_BILD = brake light
wert_03 = flashing
BFD_1_BL_M_ERSCH_BILD = 3 Brake light
wert_03 = flashing
BFD_1_RL_BL_1_ERSCH_BILD = brake light 1
wert_03 = flashing
BFD_1_RL_BL_2_ERSCH_BILD = brake light 2
wert_03 = flashing
BFD_1_NSL_ERSCH_BILD = rear fog lamp
wert_03 = flashing

[Warning light on de-/ activate]*

Control unit: LMA

LICHT_AN_WARNUNG
nicht_aktiv -> active

[Zündschlüsselwarnung de / activate]*

Control unit: COMBINATION

CC_ZUENDSCHLUESSEL
active -> nicht_aktiv

[Acoustic seat belt warning disable]*

Note: The effect on the release behavior of the air bag is unknown.*

Control unit: ABG

SBR_BEIFAHRER_ACSM
active -> nicht_aktiv
SBR_FAHRER_ACSM
active -> nicht_aktiv

or a vehicle, contracting with the value:

+ OI11 for the driver
+ OI12 for the passenger

and

to 03/2004:

Control unit: COMBINATION

SBR_BEIFAHRER
nicht_aktiv
SBR_FAHRER
nicht_aktiv

from 03/2004:

Control unit: SGM

SBR_BEIFAHRER_SGM
nicht_aktiv
SBR_FAHRER_SGM
nicht_aktiv



Control unit: ACSM

SBR_BEIFAHRER_ACSM
nicht_aktiv
SBR_FAHRER_ACSM
nicht_aktiv

[Passenger seat occupancy sensor mat disable]*

Note: The effect on the release behavior of the air bag is unknown.*

Control unit: SBSR

SBE1_SBSR
nicht_aktiv

or

Control unit: ABG

SBE1_ACSM
nicht_aktiv

[Home Comfort]*

The ignition key must be touched only briefly to the ignition to start the car.

Control unit: CAS

HOME COMFORT
nicht_aktiv / active

[PDC volume change]*

Control unit: PDC

LAUTSTAERKE_HINTEN
e65, e60, RR1, e70, wert_02 to wert_07
LAUTSTAERKE_VORN
e65, e60, RR1, e70

[Engine start only when the brake pedal depressed, de-/ activate]*

Control unit: CAS

ANLASSSPERRE_BLS
active / nicht_aktiv

[MP3 functionality upgrade]*

KMP3 in the FA-supplemented

Control unit: Cappl

MP3_CCC
full

[IPod interface retrofit]*

IPOD in the FA supplement

Control unit: Cappl

MP3_CCC
external or full
CDC
active

[AUX-IN interface upgrade]*

NAUX in the FA-supplemented

Control unit: Cappl

AUX_CONFIG
mounted
INPUT_SCALING_SUB2
wert_02
__________________
PAPER is offline   Reply With Quote