E46Fanatics - View Single Post - Homemade Fan Nut Tool (water pump pulley holder) w/Pic
View Single Post
Old 11-15-2011, 07:38 PM   #6
Registered User
Join Date: Sep 2011
Location: Cranford, NJ
Posts: 59
My Ride: '99 323i
FYI for anyone who attempts this... if you make it 1/8" from the edge as advised, the aluminum WILL break. (I used the exact same bar of aluminum from Home Depot and that's what happened this morning. Best to aim somewhere around the middle.
sonnybobiche is offline   Reply With Quote