View Single Post
Old 11-24-2011, 06:33 PM   #24
dcaron999
Registered User
 
Join Date: Jan 2004
Location: Mirabel, Quebec, Canada
Posts: 186
My Ride: 2002 330xi
First off, the outlet with the red cap is pointing in the wrong direction. See orientation of my functional and connected pump, where my finger is pointing in the pic below.

Now for a view from the top ...

When you remove the cap off your pump, your tank will emtpy itself, so may you want to extract your washing liquid first. The pump can be removed by lifting it straight out of the container, without any tools, and barely any force. You then must find the main flexible black tubing and connect it back to your pump outlet. You'll notice on the above picture that there is a plastic black lock ring on a white female junction, which slips over the male pump outlet connector. This black tubing leads to both of your telescopic arms and nozzles. See part #1 on diagram in my first post.

I hope this helps you with your issue ...

You most likely have a leak with your passenger side nozzle, just like I had, so you want to order and replace that ...

Last edited by dcaron999; 11-24-2011 at 07:07 PM.
dcaron999 is offline   Reply With Quote