View Single Post
Old 11-27-2011, 01:26 PM   #4
Greg@DetailedImage.com
Clean Shine Protect Expert
 
Greg@DetailedImage.com's Avatar
 
Join Date: Mar 2005
Location: NY
Posts: 6,007
My Ride: is clean & protected
Quote:
Originally Posted by Flycaster View Post
Are you saying that just the MF towel alone will remove the Meguiar's plastic cleaner residue and make things clean enough so that the Zaino stuff will bond to the lens? Naively, I would think that the lens should be cleaned with something like alcohol and/or Dawn to prepare the surface for Zaino to bond properly???
Generally speaking the residue left behind by polishes can be removed with just a clean microfiber towel. Some faint oils can remain that can slightly hinder the bonding process so wiping with a 50/50 mix of IPA can help. However using alcohol repeatedly on plastic, vinyl or rubber surfaces can dry them out so I don't recommend using them often. However you can skip this step altogether and just apply the sealant and get very similar results in my experience.

Greg @ DI
Greg@DetailedImage.com is offline   Reply With Quote