View Single Post
Old 11-29-2011, 04:08 PM   #2
Rob43
Hates Low RPM !
 
Rob43's Avatar
 
Join Date: Oct 2009
Location: Richmond VA
Posts: 3,769
My Ride: 03 331Ci 5spd R1200R
OP, what's the mileage on your Bimmer ?

Typically the Best price on "just labor" (no parts) for a clutch job, would be about $400, $500 at the most. If you shop the job around town, tell them you'd pay cash if that helps get it done for cheap. If you buy the parts, that would probably be the cheapest; just make sure you buy the right parts. If they buy the parts, they will add about 20% to the Retail cost of the parts.


http://realoem.com/bmw/

http://realoem.com/bmw/showparts.do?...93&hg=21&fg=05

Using this info you can search out the cheapest parts, always start first with our Forum Sponsors.

I found this one at Forum Sponsor Turner Motorsports.
http://www.turnermotorsport.com/p-36...-25-z4-25.aspx


Good luck.
__________________



Rob #43 ITS/ITR/STU, BMW 325I, STU LAP RECORD
SUMMIT POINT WV 1:24:229 S.C.C.A.
(DynoDynamics https:vimeo.com/8486878 Dyno Video)
"Chance Favors The Prepared Mind"

Need Help With Your Nitrous Ambitions ?.....PM ME
Quote:
Originally Posted by RacerX View Post
Nitrous is a little trickier than boost, but it's not the spray that kills motors, it's STUPIDITY!!
Rob43 is offline   Reply With Quote