View Single Post
Old 12-10-2011, 08:39 PM   #4
Registered User
Join Date: Nov 2010
Location: San Diego, CA
Posts: 98
My Ride: is a truck.
Originally Posted by browniesong View Post
was retro-fitting them difficult? would i be able to do the job with just the stock halogen assembly and these? If so, DIBS!
If you use stock pre-facelift sedan halogen assemblies with bi-xenon projectors and want to mount all the parts in the stock locations you will need to modify the housings. The ignitor usually sits under the projector bowl. With bi-xenon projectors there is not room for the ignitor due to the shield motor.
jack.chris328 is offline   Reply With Quote