you sir, have made me want to continue my install with my sedan. I'll be using a Single JL Audio 12w6 in a vented box (I normally prefer sealed) and a JL Audio 500/1 and I'm thinking of pirating my JL 300/4 out of my Audi and putting it in the BMW. For Speakers I believe i'll be using FOCAL A165 components front and rear, however I havent decided 100%.
I have an 02 sedan so i figure my front doors will be a little bit different however i'm not too terribly worried about it. My main worry is depth in the door and weather i truly have to use 5.25 or i can do 6.5's
For reference my 2000 Stage 3 Audi A6
Kenwood Excelon DNX-9140 Headunit
Focal Access A165 6.5" components in the front doors
Focal Access A165 6.5" components in the rear doors
3 10" JL Audio 10W6v2's in a 2.93 cubic foot sealed box built from 3/4" MDF that's double faced for the subs, and full of polyfil
JL Audio 1000/1 for the woofers
JL Audio 300/4v2 for the doors.
7 Boxes of Dynamat Extreme through the whole car
2 Optima batteries
3 Fared Tsunami cap
Tsunami Distribution blocks
Tsunami Battery Isolator
Stinger Pro series 0 gauge wire through out the whole car
The A165 components will be switched out for Focal K2's in the front and rear, and the 300/4 will probably be pirated to go into the bmw. I'll replace the 300/4 with twin 300/2's which should be great for the K2's
Setup for the BMW right now is
JL Audio 500/1
JL Audio 12w6 in a 1.25cubic foot vented box
I'm thinking i'll pirate the 300/4 or i'll use an older Alpine MRP-f300 i have sitting around,
As for speakers, maybe Diamond D6's or just get some more Focals, I just cant decide on what size.
any suggestions or words of advice?
03 Silverado 2500 HD, Crew cab long bed.... tow thing
00 Audi A6 Stage 3 2.7t
01 E46 325i with a 1jz swap