View Single Post
Old 12-25-2011, 07:32 PM   #5
Paulscustom
Registered User
 
Join Date: Sep 2011
Location: St louis
Posts: 55
My Ride: 323i
Is the piston stuck or just the bushings on the bolts sticking. Pull the bolts and sleeves, clean and lightly grease them. You could work the piston in and out by having someone apply the brake the carefully with a screw driver collapse the piston by inserting it between the pad and rotor. Drive it and see if it's heating up again. Good luck! Bad timing for brake trouble.
Paulscustom is offline   Reply With Quote