View Single Post
Old 01-23-2012, 12:32 AM   #59
Registered User
Join Date: Jan 2008
Location: Ridgeland, MS
Posts: 5,432
My Ride: Just Fast!
Send a message via AIM to WALKD U Send a message via Yahoo to WALKD U
Originally Posted by kaboo0m View Post
you have a 1988 seta e30 with a plastic bumper swap (essentially a late model and the last to the ETA). very desirable to us DD guys without having to settle for diving board cars. They were quite rare out here in California.

"In order to meet federal emissions standards in it's final year of production, the '88 325 receives a 325i cylinder head, exhaust system, and engine management control with self-diagnostic capabilities (Motronic 1.1) as well as special pistons, (lowering compression slightly to 8.8:1), a slightly larger intake manifold and a revised valve cover. These changes bump up the eta's power rating slightly (to 127) and a 6000 RPM tachometer is fitted. The cooling system is overhauled and the expansion tank is shifted to the driver side. A new oil dipstick and fuel cap are used, and the fuel tank is enlarged to 16.5 gallons.

On the inside, the window regulator is redesigned (after 2/88) and the manual power window override is deleted. The external fader switch disappears, the hazard switch is revised and swaps positions with the defrost switch, and the power window circuit breaker is also moved onto the center console. The instrument cluster warning lights are revised with slightly larger lettering and "BRAKE FLUID" replacing "BRAKE". On the rear shelf, the center high mounted stop lamp (CHMSL) becomes more aerodynamic despite not being exposed to high amounts of drag. The door panels are also revised with the textured ribbing no longer used. 1988 model year cars also received a cosmetic upgrade that include shorter aluminum bumpers, revised front valance with integrated foglights, a lower rear apron, larger rear taillights with horizontally mounted reverse lights, and a lower rear fender line."
Unless it had a intake Manifold swap and etc. SETA has a different intake Mani.
2005 AW/IR M3
MaximumPSI Stage4
993whp/651wtq SAE Corrected

2005 JB/BLK 330i ZHP
NA Bolt-ons
207whp/216wtq SAE Corrected

1996 BLU/BLK M3
NA Bolt-ons
235whp/225wtq SAE Corrected

1988 SETA 325I
NA Bolt-ons
165whp/160wtq SAE Corrected
WALKD U is offline   Reply With Quote