View Single Post
Old 01-28-2012, 11:58 PM   #225
Registered User
Join Date: Jul 2011
Location: Brooklyn
Posts: 202
My Ride: E46,V12 E30
Originally Posted by Rob43 View Post
Agreed, but an expensive route of obtaining 300 WHP.

If it were me, I'd go this route.

First I'd get the motor breathing as good as possible, cost without installation is about $2800 for items 1-5.

1) Head work: Porting Intake & Exhaust, Race Valve Job, Port Match Intake & Exhaust, Surface / only if needed.

2) Cams: 264/252

3) Header

4) CAI, Long Tube

5) Power Pulleys
************************************************************ **************************
6) Direct Port Nitrous, 35-150 WHP. Your stock internals will handle these numbers when progressively sprayed. So you could easily make more than 300 WHP, & what's even better is the WTQ output of a system like this. I'd go as far as saying that this exact setup on your 2.5L 323 would walk a stock Vette.

A DP nitrous system with all the safety devices would cost $1500-$2000.

Good luck.
Rob thank you bro for the break down this is what I needed man!

Uploaded with
DutchE46 is offline   Reply With Quote