View Single Post
Old 01-29-2012, 06:42 PM   #13
Handle46
Registered User
 
Join Date: Sep 2008
Location: Los Angeles,CA
Posts: 48
My Ride: 2000 323ci
Hey fellas, I actually used both your advice, I searched the forums and found the scale diagram of the fan/waterpump holder tool, here at bimmerfest.com http://www.bimmerfest.com/forums/sho...=464226&page=5 (scroll to the bottom, its a pdf doc.). Next I got a $6 3 ft flat-bar from OSH, printed this diagram out, traced it, cut it, then BOOM! got a $30 dollar tool for 6 bucks and some sweat, Sweet deal! I screwed on one of the waterpump pulley screws through the tool and then placed the 32mm wrench on the fan nut, held the waterpump tool with one hand and wacked the wrench with my mallet with the other hand. Finally, that damn fan is off, and now I can get to work.

Last edited by Handle46; 01-29-2012 at 06:48 PM. Reason: Missing Information
Handle46 is offline   Reply With Quote