Replaced FSR Blower still does not work properly
I am Having some issues with my Blower motor. I have replaced the final stage resistor but it still only works every now and then. And even sometimes if i hit a really funky bump it will kick on. when it works, it works fine...but when it doesnt work, it wont work AT ALL.
Originally Posted by dcaron999
I determined what the problem was - a loose connection or poor electrical contact seemed to be the issue with my FSR. I cleaned the connection with a disposable cardboard nail file, and finished off with some electrical contact cleaner.
All is working perfectly now. .
I'm interested in knowing which connector u cleaned?? as this could also be my problem!!