View Single Post
Old 03-08-2012, 12:49 PM   #3
aggieE46
Keep it clean
 
aggieE46's Avatar
 
Join Date: Aug 2006
Location: Royse City
Posts: 8,038
My Ride: 03 Evo, 07 Passat
Send a message via AIM to aggieE46
Thanks. Units are at the machine shop now having the bearings pulled. I gave them the go-ahead to destroy the E36 bearings. He knows he can pull one of the E46 bearings without issue. The other might give him some trouble. If so, I'll be at Harbor Freight later getting a separator to do the job.

Got some quotes on the work needed, too. If they are able to do everything, this should be a cheap project. I have a rough estimate together for the total cost of the project. Including what I paid for the LSD unit, machining, a few internal parts, and fluid, I'm guessing that this will run about $540. That's a rough number. I have some options on my spacer plate. This number is with a fully cut unit. It's possible for them to make me one and me do some grinding to cut the costs. With budget in mind, I'll probably do that. If this is going into a 2.93 or 3.07, the cost will be even cheaper. I'll go over details on costs as the are incurred.

Quote:
Originally Posted by tinkwithanr View Post
Niice, good luck with this.
__________________

Last edited by aggieE46; 03-08-2012 at 03:19 PM.
aggieE46 is offline   Reply With Quote