View Single Post
Old 03-10-2012, 09:56 PM   #19
stockgp
Registered User
 
Join Date: Nov 2011
Location: steubenville, oh
Posts: 189
My Ride: 1999 323i
Well since there isn't much input on this subject on this forum, I found a fix myself.

Bought a sheet of 1/16" solid silicone and went to town.

Cut a gasket that fit the ram bolts, but was a bit smaller than the rubber bushing diameter so it would stretch, then I stalled as normal. I ran a test spray on the side that was leaki g, and enough of the silicone sanwiched between the bushing and the bushing hole that it sealed the.leak. a

As long as it stays that way, im a happy sob.
stockgp is online now   Reply With Quote