E46Fanatics - View Single Post - FS: New Z4 3.0 shifter
View Single Post
Old 05-14-2012, 02:22 AM   #1
Registered User
Join Date: Oct 2009
Location: Oakdale, MN
Posts: 778
My Ride: 02' M3 SMG, 02' 330i
FS: New Z4 3.0 shifter

(1) New Z4 3.0 shifter.


Mounted, but never used as I didn't like the way it sat.

Will make an excellent ssk, doesn't hit driveshaft or guibo, but it does move neutral slightly up and to the right, not enough to interfere with shifting, but I just didn't like it.

There are some tool marks on the shaft between the rubber bushing, and the pivot ball, the bottom part of the bushing casing is also slightly pinched. All of this was caused by me trying to put a slight bend in it ( it's a straight design) doesn't affect functionality of it, but I prefer full disclosure. Can be seen in the pictures with m holding it to show this slight crimping.

330i - AA Tuned, Headers, UUC Stage I LW FW, e36 M3 Clutch, UUC SS Clutch line, BMW Performance Intake, Evo Sport Pulleys, BMW Performance Cross-Drilled Rotors, Hawk HPS, BW SS Brake Lines, BW Solid Guide Bushings, BMW Performance CF Strut Brace, H&R Sways, H&R Sport Springs, Bilstein Sport Shocks, Powerflex Bushings, LED Tails, Clear Sides/Turns, Black Grill, Mtech 2, CF Splitters

M3 - Not enough room to list

Last edited by lejeunebimmer; 05-18-2012 at 12:13 PM.
lejeunebimmer is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.