View Single Post
Old 06-02-2012, 08:08 AM   #12
Registered User
Join Date: May 2009
Location: Crestview, Florida
Posts: 743
My Ride: 2006 330CiC/ZHP
Btw, anyone thinking of doing this needs to know that the area that had the HK plate is recessed. You'll have to use a hammer and something else that's flat to pound that back into a flat area; I used the wrong (flat) side of a masonry chisel. Also, it leaves two holes, so you have to re-cover it versus leaving just the metal and painting it, etc.
radarcontact is offline   Reply With Quote