E46Fanatics - View Single Post - *** The Official Automatic --> 6 speed (ZHP Tranny) swap! - LOTS OF PICS
View Single Post
Old 06-15-2012, 10:26 PM   #201
Registered User
Join Date: Dec 2010
Location: MD, USA
Posts: 1,489
My Ride: 01 330CI 6MT ZSP EU3
Originally Posted by TitaniumCranium View Post
This is the one last piece that is the holy grail of automatic to manual conversions, the one thing that almost no one seemed to get working... Until now!!! I can confirm without question that this is the solution for mirror dip on auto->manual conversions. Pin 7 of connector X11176 on the instrument cluster needs to be connected to X428, the Blue/Yellow wire buss connection above the fuse block in the glove box. After tracing all the wiring in the WDS, I ran test wires today to make certain the connection worked. I'll order all the right parts and the correct wire before I permanently wire this in but IT WORKS!!!

I'll post the parts list once I have the connectors and wire.
How to detach the connector box with X428 from the fuse holder? I already dropped down the glove box and lowered the fuse holder as low as possible, but I can't figure out how to detach the box with the X428...

NM, I figured it out: just push it off you, toward the front of the car.... In that 5 pol blue/yellow section I have exactly 1 spot I am going to use for this. Have you figured out which connector should be used? It is part #8, but this part has 3 different part numbers:
I think it is 61131387140 (for thinnest wire, 0.35-0.5mm2), but for some reasons it is the most expensive one ($1+; same plug but for thicker wire (61131387142) costs just several cents! Weird....).

Last edited by Nervous; 06-16-2012 at 01:13 AM.
Nervous is offline   Reply With Quote