E46Fanatics - View Single Post - *** The Official Automatic --> 6 speed (ZHP Tranny) swap! - LOTS OF PICS
View Single Post
Old 06-21-2012, 01:32 PM   #204
Registered User
Join Date: Dec 2010
Location: MD, USA
Posts: 1,489
My Ride: 01 330CI 6MT ZSP EU3
Originally Posted by Rich-330ci View Post
Correct, it all works except the clutch pedal cut off, but ONLY with the EGS connected, when the EGS isn't connected it won't even turn on!, I'm going to try get another module to make sure it's that isn't faulty.
So, your problem is very similar to mine then. Here I described it:

I bet if you disconnect the EGS you'll get the same error I got (217 CAN timeout EGS1) and this is why cruise control doesn't work. Thus, somehow, DME still looks for EGS, so there is something somewhere that we missed to recode. But what? Do you have any new info about this matter?

BTW, I know how to make my clutch switch to behave the same way as yours (clutchless start). Currently my EWS gearbox type is set to "Automatic" (even though there is no option 205!) and in this case it can't start until you depress the clutch pedal. But if I set to manual (via PASoft) it starts to work the same way as yours - I can start it w/o the clutch pedal! And my DME is flashed to Euro3 firmware, btw.

Last edited by Nervous; 06-21-2012 at 01:36 PM.
Nervous is offline   Reply With Quote