E46Fanatics - View Single Post - OIL TEMPS GETTING HOT - HPF Oil Cooler Group Buy!!
View Single Post
Old 06-25-2012, 03:19 PM   #1
HPF Chris
Past Site Sponsor
Join Date: Feb 2006
Location: Portland, OR
Posts: 3,684
My Ride: 2002 M3, 2006 530i
Thumbs Up OIL TEMPS GETTING HOT - HPF Oil Cooler Group Buy!!

It's that time of year again where temperatures skyrocket!! If you own an E46 M3 than you've probably seen the oil temp gauge needle to the right of the centerline. Don't ruin your engine by overheating it. We've taken the E46 M3 factory oil cooler to a completely new level for all NA, supercharged and turbocharged M3's. This is a plug and play oil cooler that simply bolts right in and replaces the factory oil cooler. The factory oil cooler lines simply connect to our new oil cooler so no need for AN fittings or steel braided lines. This oil cooler also has brackets that are designed to work for NA, supercharged, and even provides mounting locations for the HPF FMIC to connect right up to it for our turbo guys. We also built ducting directly into the oil cooler to bring cool air up from below and to redirect heated air flowing across the radiator around the oil cooler and not through it. This oil cooler design also retains the factory fan shroud, A/C fan, A/C lines and radiator location and configuration. Installation is a snap and the average at home do it yourselfer can install this themselves.


400% Increase in Core Volume
Factory Core Dimensions: 23" x 1.5" x 2.75" - HPF Core Dimensions: 26" x 4" x 3.6"
Superior Bar and Plate Core Design
Powder Coated Radiator Ducting and Inlet Scoop
Polished Aluminum
Billet End Tanks

NA without ducting - $895 - Group Buy Price $695
Supercharged and Turbocharged w/ducting $995 - Group Buy Price $795
Call now to get on the group buy list AND SAVE $200 (503) 256-5600 or email sales@horsepowerfreaks.com

HPF Chris is offline  
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.