E46Fanatics - View Single Post - DIY: Intake boot replacement. No more whistle while accelerating
View Single Post
Old 07-02-2012, 04:28 PM   #77
Registered User
Join Date: Jul 2004
Location: Los Angeles, CA
Posts: 112
My Ride: 2001 325ci
Originally Posted by chris98891 View Post

Anybody have any idea what the PN is, or what system its attached to? I may need to replace the little plastic piece that both hoses plug into. It's extremely brittle and i don't want it sucking something into another part of the car.

EDIT: found it for anybody that is looking: 13327503677

Such a pain in the ass. FYI, the part numbers for 325i and 330i are different. the one for mine is 13541435627
I put the one listed by the OP into the car and came up short for fitting it onto the intake box. I got it on there, but as long as there aren't any leaks, and i'm able to fit it on the MAF, should i have any problems? I do NOT want to get in there again haha
That broken small hose leads to the fuel filter under the driver side of the car. Had the exact same problem. Was getting the P0102 code. So far changed the MAF, intake boots, F connector and the two hoses and checked the connectors for any crimps. Still throwing the same P0102 code. Anyone figure this out?
kshin001 is offline   Reply With Quote