E46Fanatics - View Single Post - FIXED: Aftermarket LED tail light is out or flickers intermittently

bparka12 · 07-24-2012, 12:11 PM

hey just another confirmation as "mekaneck" did above

... i re-soldered all the soldered points and now it works like brand new! No more getting pulled over for me! Just go to radioshack if you don't have an soldering iron they are $9.00 get the 15amp one so you don't cook the board... i also beefed up the soldering points a little with radioshack's 62/36/3 .022" diameter solder for added security; it seems as though the little Asian kid in China didn't use enough solder the first time

thanks guys for all your help on here!

i spent a few hours yesterday trying to get a hold of someone to buy a new resistor/cap box... no need now

07-24-2012, 12:11 PM	#43
bparka12 Registered User Join Date: Sep 2011 Location: Alpine Utah Posts: 46 My Ride: 330ci View My Garage	hey just another confirmation as "mekaneck" did above ... i re-soldered all the soldered points and now it works like brand new! No more getting pulled over for me! Just go to radioshack if you don't have an soldering iron they are $9.00 get the 15amp one so you don't cook the board... i also beefed up the soldering points a little with radioshack's 62/36/3 .022" diameter solder for added security; it seems as though the little Asian kid in China didn't use enough solder the first time thanks guys for all your help on here! i spent a few hours yesterday trying to get a hold of someone to buy a new resistor/cap box... no need now __________________ VMR VB3 - ZHP FCA - UUC ROTORS/P1 FW/SWAYBARBARIAN/SSK EVO3 W/DSSR - DINAN CARBON FIBER CAI - SHARKED Last edited by bparka12; 07-24-2012 at 12:14 PM.