View Single Post
Old 07-31-2012, 08:46 PM   #14
grubby_baker
Registered User
 
Join Date: Jul 2012
Location: Minnesota
Posts: 9
My Ride: 2005 325xi
Got the new driveshaft installed. Vibration is all but gone. There is a slight vibe under very hard acceleration. I found that the output shaft of the transfer case to the front driveshaft is a bit sloppy. May be the source. But I'm happy with it for now. For the exhaust studs, I ended up cutting off the studs flush to the flange, center punched them, drilled them out to 5/16" and used stainless cap screws (allen head), 2" long. Looks decent and no exhaust leaks with new gaskets.
grubby_baker is offline   Reply With Quote