More than enough. I can do it fairly quiclkly now. 30 minutes a side.
Originally Posted by Ballistic325
I'll be on to this either this weekend or the next, depending on available time. I'm budgeting about 1.5 hours per side. Too little?
another tip, the trailing arm has a beveled edge. MAKE SURE you push the new bushing in on THAT side of the trailing arm. It acts as a guide to get it started. Of course make sure the bushing is clamped with a large hose clamp. Keep tightening the clamp til the bushing is fully compressed (no gap in the splits)
Last edited by Mango; 08-17-2012 at 01:14 AM.