E46Fanatics - View Single Post - Garrett 60 trim turbo
View Single Post
Old 08-17-2012, 12:05 PM   #1
Registered User
Join Date: Apr 2010
Location: SD, CA
Posts: 261
My Ride: M3
Send a message via AIM to bimmerguy055
Garrett 60 trim turbo

This turbo was lightly used it only has roughly 6k on it. Only reason why I'm letting it go is for wanting more power. The turbo is good for ~400whp. There is slight shaft play, but its a normal amount. for a 2.5 you will see fully boost by 3k rpm and ~2.8k rpm on a 3 L. Looking for $450 shipped

60 mm inducer 76mm exducer compressor wheel
74 inducer 74mm exducer turbine wheel
T3 hot-side that is .63 a/r and 2.5" outlet
Compressor housing is 3" intake with 2" outlet

Without Failure There is No Success

Last edited by bimmerguy055; 08-17-2012 at 12:07 PM.
bimmerguy055 is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.