View Single Post
Old 08-23-2012, 07:08 PM   #1
328ci906
Registered User
 
Join Date: May 2010
Location: Scranton, PA
Posts: 432
My Ride: 2003 M3
Arrow Valve Adjustment Kit for Loan

BMW Shim Kit and Tools for Loan

Below is nearly everything you need to perform a valve adjustment on the S54B32 motor, and it's available on loan for 7 days.



The kit consists of:
-BMW's Shim Kit
-Micrometer
-Multiple Feeler Gauges
-BMW's Shim Removal/Install Tool
-Guide Sheet

Here are the feeler gauges and the BMW Shim Tool...



This is the micrometer that comes with the kit...



And this is the Guide Sheet I typed up for you to keep for your maintenance records for the car...



I will need a $500 deposit via Paypal before I ship the tools out to you. Once you receive the kit you will have 7 days to complete the valve adjustment and return the kit to me. If you return the full kit to me on time I will refund you $450 and your total cost for the valve adjustment will be only $50 plus return shipping and the cost of replacement shims. If however, you want the kit for 2 weeks, your total cost will only be $60 plus shipping and shims. Expect this job to take you anywhere from 3-5 hours to complete.

You will be responsible for replacing the shims missing from my kit when you are done. If you opt to not replenish the kit with new shims before shipping it back, I will subtract $5 from your deposit for each new shim I need to order to fill the kit. I just ordered new shims from BMW after I did my valve adjustment and they ran about $4.80 each. Below for your convenience is a list of all the available shim sizes with their respective part numbers...

1.72MM (11 34 7 832 270)
1.76MM (11 34 7 832 271)
1.80MM (11 34 7 832 272)
1.84MM (11 34 7 832 273)
1.88MM (11 34 7 832 274)
1.92MM (11 34 7 832 275)
1.96MM (11 34 7 832 276)
2.00MM (11 34 7 832 277)
2.04MM (11 34 7 832 278)
2.08MM (11 34 7 832 279)
2.12MM (11 34 7 832 280)
2.16MM (11 34 7 832 281)
2.20MM (11 34 7 832 282)
2.24MM (11 34 7 832 283)
2.28MM (11 34 7 832 284)
2.32MM (11 34 7 832 285)
2.36MM (11 34 7 832 286)
2.40MM (11 34 7 832 287)
2.44MM (11 34 7 832 288)
2.48MM (11 34 7 832 289)
2.52MM (11 34 7 832 290)

Your local BMW dealer is normally the cheapest/fastest way to get replacement shims. Some online dealers are cheaper, but after factoring in shipping and handling the dealer is almost always cheapest.

If you are interested and would like my kit, send me a PM or alternatively send me an email directly at niart906@gmail.com.



To help you prepare for the job, here is a list of other tools/parts required to perform a valve adjustment, as well as a few links to some helpful DIYs...

Tools Needed:
1. 32mm fan wrench
2. 1/4" Ratchet
3. 3/8" Ratchet
4. 19mm socket, 18mm socket, 13mm socket, 10mm deep socket, 8mm socket, T27 torx socket, spark plug socket
5. Pick
6. Expansion clip screw driver
7. Small prybar
8. Paper towels
9. Assortment of lights and magnets (very helpful)

Parts Required:
1. Valve Cover gasket BMW Part #11-12-7-832-034 (1)
2. Spark Plug gaskets BMW Part #11-12-7-831-271 (6)
3. Rubber grommets BMW Part #11-12-1-437-395 (2)
4. Rubber grommets BMW Part #11-12-7-830-972 (13)
5. Copper O rings BMW Part #07-11-9-963-129 (2)

Valve Adjustment DIY's
-Thorough Write up here... http://www.euroaddiction.net/forum/m...djustment.html
-Great Videos here... http://www.m3forum.net/m3forum/showthread.php?t=347929
-Additional Tips and Tricks here... http://www.m3forum.net/m3forum/showthread.php?t=113415


Thanks for Looking!!
__________________
2003 ///M3 6spd Jet Black/Cinnamon (I Loan Valve Adjustment Tools! PM me...)

Last edited by 328ci906; 08-28-2012 at 09:49 PM.
328ci906 is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.