E46Fanatics - View Single Post - Bosch 42lb/hour Green Giant Fuel Injectors Set of 6
View Single Post
Old 08-24-2012, 05:08 PM   #1
WALKD U
Registered User
 
Join Date: Jan 2008
Location: Ridgeland, MS
Posts: 5,432
My Ride: Just Fast!
Send a message via AIM to WALKD U Send a message via Yahoo to WALKD U
Bosch 42lb/hour Green Giant Fuel Injectors Set of 6

Bosch 42lb/hour Green Giant Fuel Injectors with EV1 Connector
Genuine Bosch Green Giant 42lb/hour Fuel Injectors

They have about 2k on them.

These superb Bosch injectors gained notoriety for their excellent flow and response characteristics in modern Volvo turbo applications. The characteristics necessary to meet stringent European emissions laws while supplying a wide dynamic flow range produces and excellent, balanced injector. The result was so popular in the aftermarket, it was nicknamed the "Green Giant" Injector.

These injectors flow 43 lbs/hr at 43.5 PSI ( 3 BAR ) and much more at higher PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths. This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector. These injectors represent the most current Bosch engineering and are used on many high power turbo oem applications.

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures and in fact, that is exactly what they were designed for!

Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a split / wide cone spray pattern for improved mixture preparation and atomization. This results in lower BSFC and better idle quality than many injectors with less flow.

Features:

•Genuine, reliable Bosch Injectors
•Excellent response characteristics
•Robust Design
High Impedance
•Low Impedance performance characteristics with High Impedance Compatibility
Specifications:

•Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
•Spray Pattern: Dual Spray Wide Cone / Split Cone
•Electrical Connector: EV1
•Fitted with Viton upper and lower o-rings.
•Static Flow Rate @ 43.5PSI (300kPa): 43 lb/hr
Applications:

•Volvo & many European makes
•Many Japanese makes
•Made for high pressure, harsh environment turbo & supercharged applications!
Cross Reference:

•Bosch 0 280 155 968 ( 0280155968 )
•Volvo 9202100

Asking $225 Shipped OBO

-Trip
__________________
2005 AW/IR M3
MaximumPSI Stage4
993whp/651wtq SAE Corrected

2005 JB/BLK 330i ZHP
NA Bolt-ons
207whp/216wtq SAE Corrected

1996 BLU/BLK M3
NA Bolt-ons
235whp/225wtq SAE Corrected

1988 SETA 325I
NA Bolt-ons
165whp/160wtq SAE Corrected
WALKD U is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.