I just installed my oil cooler a few weeks ago and i am happy to report it works!!...My car runs a Vortech blower that shares my engine oil and this solved my problems when running in extreme heat and humidity. My car actually runs below 210 while just cruising around and only slightly goes over 210 when I am beating on the car. I would say 212-215 at the most, but then it cools off immediately after i stop beating on the car. The only thing i found myself doing was making my own brackets to have added securing strength in the front on the cooler. I used the pre-existing bracket and holes on the oil coolers duct for F.I. cars that mount to the HPF FMIC, and i just made 2 brackets that use the bottom bolt for the front bumper support and just nut and bolted them together. I can grab the oil cooler and shake the whole car on the lift so it's safe to say it's in there nice and tight. Great piece guys i love it.
SPECIAL THANKS TO GINTANI & OE TUNING
Last edited by ///m3some; 08-30-2012 at 05:01 PM.