E46Fanatics - View Single Post

DRICHFL · 08-31-2012, 07:29 PM

This is some of the damage done by the fan blade. My Transmission Oil Cooler got destroyed. It is difficult to get the transmission's quick connect to disengage from the oil cooler. After struggling with the transmission hose with no success to get it lose, I was wondering if cutting the transmission's hose behind the quick disconnect would cause a problem. If I install the cut transmission hose onto the new oil cooler with a clamp, will it hold or will it have to much pressure and cause a major leak.

Thanks for any suggestion in advance.

08-31-2012, 07:29 PM	#307
DRICHFL Registered User Join Date: Nov 2008 Location: Tallahassee, FLorida Posts: 22 My Ride: 330ci View My Garage	This is some of the damage done by the fan blade. My Transmission Oil Cooler got destroyed. It is difficult to get the transmission's quick connect to disengage from the oil cooler. After struggling with the transmission hose with no success to get it lose, I was wondering if cutting the transmission's hose behind the quick disconnect would cause a problem. If I install the cut transmission hose onto the new oil cooler with a clamp, will it hold or will it have to much pressure and cause a major leak. Thanks for any suggestion in advance. Attached Thumbnails Last edited by DRICHFL; 08-31-2012 at 07:33 PM.