View Single Post
Old 09-01-2012, 01:57 PM   #2
dmax
Registered User
 
dmax's Avatar
 
Join Date: Aug 2006
Location: NJ
Posts: 22,859
My Ride: '99 328i 1.04646 mu
Sledge hammer if you can knock the stud from side to side to loosen it up. Monster pry bar a little at a time.

But, you know you can just drill through the studs...make holes through the studs at least 1 1/4 inch back from surface of wall...in the center of stud. You can easily fit a couple of wires in a 5/8" hole...make hole bigger if needed and keep it up from the floor....12-18" or so...some level comfortable to drill at.
__________________


Performing at the Comedy Cove--595 Morris Ave. Springfield NJ reservations 973 376-3840

A recent set Skip to 1:30
dmax is offline   Reply With Quote