View Single Post
Old 09-10-2012, 10:19 AM   #61
Kris@TSS
Sponsor
 
Kris@TSS's Avatar
 
Join Date: May 2012
Location: Fresno, California
Posts: 591
My Ride: 2005 BMW 545i
Quote:
Originally Posted by fth001 View Post
So we just finished installing a Street Edge coilover set and immediately got front end spring chatter. Very noticeable when turning and during compression and rebound. Took everything apart and noticed it was missing the all-so-important washers between the top spring perch and top hat. Without them the bearing in the top hat wasn't making contact with the upper perch causing the spring to bind and turn every time the wheel was turned. Now with everything in place the top hat turns freely on the coilover when fully assembled and no more noise. We had the new kid working on this, just goes to show you that if you want it done right you gotta do it yourself. Hope that helps you guys with the spring noise.
You are good to go now right?
__________________
Kristina "Kris" Ash
www.thesuspensionsource.com
5654 E. Westover #112
Fresno, CA 93727
1-888-230-1288
Kris@TSS is offline   Reply With Quote