View Single Post
Old 09-23-2012, 08:28 PM   #6
benzovs
Registered User
 
Join Date: Aug 2012
Location: Tucson
Posts: 138
My Ride: 2000 323i
So I got the unit all wired up and running. All I have left to do is make the neutral safety switch ( so the car will only start when in neutral) and once that is done I will post pics of the switch install and a video of the alarm in action. All I did in these last pics was clean up the wiring a little so that I could remount the general module/alarm compartment back up on the lock in tabs. I wired up all my relays and mounted them right behind the factory relays. I had to cut away some of that foam material that sits high up under the dash so that I had room for the relays to fit. I used 5 in all; fog lights, trunk release, windows comfort close, windows comfort open, and clutch bypass. The starter kill has a relay as well, but since it's a default one, I don't count it. If any of you guys decide to tackle this install and you need help, just pm me. I can pretty much walk you through any alarm. Thanks for the positive comments.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
benzovs is offline   Reply With Quote