E46Fanatics - View Single Post - 5 speed not pulling off motor
View Single Post
Old 09-28-2012, 07:45 PM   #5
Registered User
Join Date: Sep 2011
Location: CO
Posts: 244
My Ride: 330Xi
I had a trans a few Weeks ago that was a real pain in the ass to remove because the pilot bearing was seized onto the input shaft. Could be the samething you're running into. A couple of large prybars finally did the trick. So, don't forget to lube the input shaft when you reinstall the tranny. Good luck.
fastjasonbmw is offline   Reply With Quote