///m 19x9.5 et 33 245 35 19 ST Coilovers. Will it fit?
Hey...looking to run the above setup on the front using VMR VB3's. I'm sure this has been done before and I would love some pics or confirmation that this will indeed work. I will probably throw on a 5mm spacer to push the wheel out a bit if I have clearance issues on the back of the wheel. The progressive spring on the ST's is beehive shape so there may be some rubbing with the non-spaced et33. Also no camber plates, just the crash pin removed from the stock tophat.
Any insight dudes? Also FYI I will run 19x10 et 25 275 30 19 rears. No rubbing is expected there...
2005 ///M3 | Phoenix Yellow | Black Interior
Euro Tune.Headers.Cats | Borla | Dr. Vanos
6 MT | SSK | ZHP Shift Knob | Helios Angels
VMR VB3 | Hankook V12 | Hotchkis Sways | ST Coils
/// Deutschland \\\