View Single Post
Old 10-02-2012, 02:23 PM   #76
glhx
Registered User
 
Join Date: Jan 2012
Location: Middle Tennessee
Posts: 711
My Ride: 2002 BMW 330ci
I posted in an earlier thread that my light was coming back on with the bypass. I took the seat bolts out...took the seat apart and cleaned all the connectors. I have not had a problem since. When it says the tensioner resistance is bad...this is usually what the cause is. You can buy a new tensioner wiring harness for $15 if you clean the connectors and it still doesnt work. Or there is a wire bypass for $50 that will fix the problem forever. Bmw put too small of wires in the original harness going right into the tensioner.....plug has a large yellow end on it under the seat. So far the occupied bypass i made is working well. I do not have inpa...i use pa soft
glhx is offline   Reply With Quote