View Single Post
Old 10-05-2012, 10:53 PM   #10
Modded ///Member
Join Date: Sep 2009
Location: Australia
Posts: 415
My Ride: 330 CiC, 330i
With regard to the gaskets, I had assumed beforehand that I would need to replace them, as this is what all the literature says to do. However when the manifold came off, it was obvious that the gaskets were in very good condition, and could easily be re-used. I would suggest removing the manifold and see what condition your gaskets are in. If they are still soft and rubbery you should be able to use them again. If not (I don't live in the US), but I suspect your local generic auto parts shop won't have them. I hope this helps
jjrichar is offline   Reply With Quote