View Single Post
Old 10-06-2012, 05:49 AM   #2
jfoj
Registered User
 
Join Date: Nov 2009
Location: Fairfax, VA USA
Posts: 12,192
My Ride: '06 330CiC, '03 M5
Pinch protection possibly not working right?

Could be the window needs to be re-initialized?

Could be the switch in the gaskets is bad?

Usually to re-initialize you roll the window all the way down, pull up on the switch to close the window and continue to hold the switch for about 5 seconds once the window has closed, usually you need to do this 2 times??

Info should be in the owners manual for the sedan and coupe as I recall.

Convertible is a very different procedure for anyone else reading along.
__________________
Solve your misfires, lean codes, rough idle - http://forum.e46fanatics.com/showthread.php?t=897616

Fuel pump failures - http://forum.e46fanatics.com/showthread.php?t=929501

Temp Info - http://forum.e46fanatics.com/showthread.php?t=964491

Hidden OBC Menu - Check Voltage, Temps, Fuel Level - http://forum.e46fanatics.com/showthread.php?t=239619

E46/E39 GM5 Door Lock Info - www.bmwgm5.com

Lower hose fan switch O-ring - BMW #13621743299
jfoj is online now   Reply With Quote