View Single Post
Old 10-07-2012, 05:48 PM   #125
jfoj
Registered User
 
Join Date: Nov 2009
Location: Fairfax, VA USA
Posts: 12,199
My Ride: '06 330CiC, '03 M5
Jesus, just get a pressure gauge and connect it to the bleeder port or modify an expansion tank cap. Then measure the max pressure.

All the math in the world will not answer the problem as there are a number of assumptions being made and many times either the assumptions are incorrect, inaccurate or you just fail to take something else into consideration.

This also assumes you do not make any basic mathematical errors.
__________________
Solve your misfires, lean codes, rough idle - http://forum.e46fanatics.com/showthread.php?t=897616

Fuel pump failures - http://forum.e46fanatics.com/showthread.php?t=929501

Temp Info - http://forum.e46fanatics.com/showthread.php?t=964491

Hidden OBC Menu - Check Voltage, Temps, Fuel Level - http://forum.e46fanatics.com/showthread.php?t=239619

E46/E39 GM5 Door Lock Info - www.bmwgm5.com

Lower hose fan switch O-ring - BMW #13621743299
jfoj is offline   Reply With Quote