View Single Post
Old 10-07-2012, 06:09 PM   #4
nissan00b
Registered User
 
Join Date: May 2011
Location: Fresno, CA
Posts: 120
My Ride: 323 Ci
Considering you have stock halogens I would hold off on the angel eyes and focus on getting better light output that you can use. In addition, you would ideally want to get bulbs around 4300k or 5000k to maximize your light output, otherwise if you go with 6000k or higher for a bluish tint you will end up sacrificing your lighting output.

Depending on your budget your best option would be to look out for a good deal on some OEM bi-xenons, swap for the ZKW lenses, then get your car reprogrammed from halogens to xenons.

Another option would be to do a retrofit of an aftermarket projector in your current halogen housing. This would be cheaper than the OEM route but requires a bit of DIY. Here's a link to a helpful thread:
http://forum.e46fanatics.com/showthread.php?t=840919

If you search around in the DIY or lighting section you should find some more useful info. Good luck!
nissan00b is offline   Reply With Quote