11-03-2012, 07:07 PM
Join Date: Sep 2003
Location: Windham, NH
My Ride: 2008 Range Rover FF
| Completed another small garage project today.
I installed a Lutron motion sensor switch in the garage. If you drive or walk in, the lights automatically turn on. The wife had mentioned that it would be cool so I made it happen. At first i bought a switch which didn't support the new lights so I ordered this one from Amazon.
Install was a PITA because it's a 3 way switch and I had to basically learn how to wire those to work properly. It included installing a jumper wire on the other switch which is just inside the house prior to the door to the garage. Basically, try something, run downstairs to the breaker box to turn it on, check to see if it worked, then run back down to turn it off, back up to try something else etc etc....
Hugely pumped though, makes things easier.
2008 Range Rover HSE
Last edited by Tb151; 11-03-2012 at 07:11 PM.